T2 Tap

Tap Height 390mm 

Tap Width 160mm 

Tap Depth 325mm 

Dispense Height 310mm 
 

Do hot water dispensers use a lot of electricity?

No. All our hot water dispensers are designed to be as energy-efficient and cost effective to run as possible while delivering up to 28 litres of filtered hot water every hour. Once the water is brought up to temperature initially, it stays hot in standby mode and costs less than £1 per day – much cheaper than repeatedly boiling a kettle. https://www.thirstywork.com/blog/are-hot-water-dispensers-really-environmentally-friendly 

How hot is the water in a hot water dispenser? 

96ºC. While not boiling water, it’s hot enough to make the perfect cuppa or hot snack. The in-built thermostat will keep the water hot without any over-boil or boil-dry issues and every hot water dispenser will give you around 28 litres of fully-filtered hot water, on-demand, every hour if you need it. 

How long should a hot water dispenser last? 

Our hot water dispensers are built to last and, depending on usage, will give you at least 2-years of trouble-free service which is why most customers take the rental package and enjoy the lifetime warranty. Made from durable, premium-grade 304 and 316 stainless steel, each unit also has an advanced filtration system (which we replace every 12 months for you) to prevent limescale around the elements. https://www.thirstywork.com/blog/how-long-should-an-instant-hot-water-dispenser-last-in-your-office-kitchen

We very much look forward to installing your new equipment, but before we do it is important that you are aware of the basic requirements we will need for connection on the day. 

The T1 Tap requires adequate worktop and cupboard space for installation. Please ensure that the following is available where the system is to be installed:

• A potable mains water supply within 5 metres of unit installation location.
• A 240-volt electric socket within 1 metre of unit location.
• A cylinder of food grade CO2 gas. (Applies to customers choosing a sparkling water option only.)
• Worktops are clear and in a finished state.
• Sufficient ventilation is in place for the refrigerated unit (if housed by a cupboard).
• Any cupboard construction to house the equipment is complete (if applicable).

All of the above can be confirmed in your site survey. Download the specification sheet for more information.

CO2 gas buying for your business: 

Unfortunately, Thirsty Work are not licensed to supply gas bottles for your Pura unit.

You may already stock a supply if you have draft beer or soft drinks on the premises and if not, there will be various local suppliers in your area that can supply this. BOC are a national company that can cater for your CO2 requirements. 

The gas you require is Food Grade CO2, this is commonly known as Suregas and is available in multiple sizes. We recommend sizes SB or E as these can fit under your worktop, 
or B if storage size is not an issue. 

Order Suregas from BOC

Should you experience any problems creating an account online with BOC please call them on 0800 11 13 33, option 2 and they will be happy to help you.

By having CO2 ready on-site for the day of your installation it will mean that you will be able to dispense cool, filtered, sparkling water without delay.